30g @ 5%, 28g @ 10%
PlasmaBlock® Air Cooled

Overview

A long term staple in the PlasmaBlock® product line. Block subassemblies available in a water cooled version. Contains all the durability and features of the newer models. Now available with a Gen 1 Enhanced and Gen 2 blocks for higher volume or ozone production. 23 kHz operating frequency, for silent operation; Line voltage 120v or 240v, 50/60hz.

For added application information, see the Plasma Block® Application Guide manual.

Models available

Refer to - Configuration Options Summary Sheet

Silent, Rugged, Reliable, Cost-effective, Compact and Light Weight, Ceramic, Air-cooled and power-Efficient.
1.1 lbs/day at 6.7% and 3 LPM : 1.9 lbs/day at 3.5% weight and 10 LPM (Oxygen or Concentrator)
No exposed, high-voltage safety hazards.
Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.
Precise Control with Turn-down to 1%.
Now Available with PlasmaVIEW ® software (optional)

Front Left
Front Right
Rear Left
Rear Right
Front Right Air Flow
Composite
10psi Ozone gr
10psi Ozone wt
15psi Ozone gr
15psi Ozone wt
20psi Ozone gr
20psi Ozone wt
5psi Ozone gr
5psi Ozone wt
Linearity
Ozone Wt
Chart Legend
Gen2
Gen2 vs Gen1
30g Gen1 10psi
30g Gen1 15psi
30g Gen1E 5psi
30g Gen1E 10psi
30g Gen2 10psi
30g Gen2 20psi
Top Photo
Top Dimensions
DAT210 Set Power Point
DAT210 Start Button Sweep
DAT210 New Profile Procedure
DAT210 Normal Running
DAT210 LED Fault Indicators
DAT210 Connection Safety Considerations
DAT210 On Delay Timer
Fuse and Power Supply Testing
IGBT and Diode Bridge Testing
16 Pin Kit Testing
DAT210 Firmware 3 1
SSD110 Tuning
Installation Operation
DAT210 Installation Operation
Quick Start
DAT210 Quick Start
Dimension Drawing
How to read the performance graphs
PlasmaBlock Performance Specs (heat dissipation, current, ozone output)
Spec Sheet

Product Details

All high voltage is safely contained completely within the Plasma Blo3ck©, thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover. High-voltage wiring is booted, and all metal grounded.
Advanced design eliminates the possibility of ozone leakage from the body or fittings. The only ozone leak possible is at the customer tightened ozone fitting. All non-metal materials are ozone rated.
Military grade conformal coating eliminates problems associated with condensation and mold as well as greatly retarding damage caused by accidental ozone exposure.
Directly installable by UL 508a panel house.
Micro Channel® design results in high concentration, reduced high-voltage levels, and more efficient operation. Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive-pressure oxygen. Materials in the gap are ceramic and aluminum.
Ideal for ‘over-the-road’ applications. Instant-ON ozone production -- no warm-up time.
Precision-machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures, as well as vacuum ride through. Only 1 psi drop with 10 LPM flow. As with any cell, the most predictable performance occurs in the positive pressure domain. Maximum pressure 86 psi., certified by UL at 5X rating.
Ozone level automatically controlled to ± 1% from 85 to 130vac, or 170v to 260vac, depending on the model.
Pre-mounted, seasoned and tested package sub-system, which includes cell, transformer, inverter and fan. Design uses the finest quality materials and machining for maximum performance and efficiency.
The Inverter is a reduced-power version of PTI’s popular SSD110. All control and interface features of the SSD110 are available in this product.
23 kHz operating frequency, for silent operation; Line voltage 120v or 240v, 50/60hz.
Inlet 1/4", Outlet 1/4”; both Stainless Compression Fittings are standard; 3/8” or 1/4” NPT on request.
Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs. Ready to install.
Rigorous 100% performance, as well as burn-in tests of all electricals, are conducted to ensure the highest level of product quality, reliability and consistency.
There is an inherent pressure drop associated with each Plasma Block. This can vary depending on the desired flow. Verification of the outlet pressure, at the desired flow, of the Plasma Block is crucial in order to prevent a negative pressure drop in the Plasma Block. This will damage the Plasma Block internals and is not a warrantied repair.

Configurations options

PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (5 - 86 psi) (UL 5x rated)
Oxygen flow liters/minute - ( .1 - 20 Lpm) or equivalent SCFH
Heat load btu/hr = 860
Inlet fittings (none, 1/4", 3/8", 8mm, 10mm other)
Outlet fittings (none, 1/4", 3/8", 8mm, 10mm, other)
Weight Lbs (Kg) : 16.5 (7.49)

DAT210 is the standard control circuit board for this unit.