200g - 600g @ 5%
PlasmaBlock® Water Cooled

Overview

A variable sized water-cooled PlasmaBlock® product available with one, two, or three water cooled blocks with Ozone output of 200g, 400g, or 600g at 5% wt, or 150g, 300g, or 450g at 10% wt. Blocks available in GenE or Gen2. For other concentrations, see performance graphs.

For added application information, see the PlasmaBlock® Application Guide manual.

Models available

Refer to - Configuration Options Summary Sheet

Silent, Rugged, Reliable, and Cost-effective.
No exposed high-voltage safety hazards.
Fully automatic tuning for constant ozone output and installation simplicity.
Service simplicity due to automatic fault diagnostics.
Now available with PlasmaVIEW® software (optional).

200g Front Left
200g Front Right
200g Rear Left
200g Rear Right
400g Front Left
400g Front Right
400g Rear Left
400g Rear Right
600g Front Left
600g Front Right
600g Rear Left
600g Rear Right
200g Gen1E 10psi
200g Gen1E 15psi
200g Gen2 20psi
200g Gen2 30psi
400g Gen1E 10psi
400g Gen1E 15psi
400g Gen2 20psi
400g Gen2 25psi
600g Gen1E 10psi
600g Gen2 20psi
Performance Graphs Legend
200g Front Back View
200g Side View
200g Top Bottom view
400g Front Back View
400g Side View
400g Top Bottom View
600g Front Back View
600g Side View
600g Top Bottom View
DAT210 Set Power Point
DAT210 Start Button Sweep
DAT210 New Profile Procedure
DAT210 Normal Running
DAT210 LED Fault Indicators
DAT210 Connection Safety Considerations
DAT210 On Delay Timer
Fuse and Power Supply Testing
IGBT and Diode Bridge Testing
16 Pin Kit Testing
DAT210 Firmware 3 1
SSD110 Tuning
Installation Operation 200g
Installation Operation 400g
Installation Operation 600g
DAT210 Installation Operation
DAT210 Quick Start
Dimension Drawing 200g
Dimension Drawing 400g
Dimension Drawing 600g
How to read the performance graphs
PlasmaBlock Performance Specs (heat dissipation, current, ozone output)

Product Details

Wi-Fi and digital communications available as an option.
Digital communications optional: simple and less expensive.
Micro Processor based, installation simplicity and automatic tuning for constant ozone output.
Automatic bus voltage compensation stabilizes output as power line conditions change.
Pulse Density Modulation (PDM), linear power (ozone) output even at high turn-down.
Service simplicity due to automatic fault diagnostics.
Easy interface to PLC or computer.
Efficient, compact, silent (25khz), safe, rugged, reliable, advanced - all the normal traits of a PTI product. Same precise linear control, with turn down to 1%, as with all Plasma Block® products.
Maximum up-time, durable, commercial / industrial solution the ozone industry requires.
Possible cell flooding is identified followed by shutdown and enunciation. No damage is caused to electronics, transformer and rarely the cell. Cell flushing and drying in the field is usually sufficient to restore full service.
Control connections of the essential I/O functions are the same as all other Plasma Block® products.
Line voltage 208v - 240v (UL CSA certified).
Military grade conformal coating eliminates problems associated with condensation and mold, and greatly retards damage caused by accidental ozone exposure.
PVC water manifold provides galvanic isolation.

Configuration options

PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (10 - 100 psi) (UL 5x rated)
Oxygen flow liters/minute - ( 5 - 60 SLPM)
Heat load btu/hr = 4400 btu
Inlet fittings (none, 3/8", other)
Outlet fittings (none, 3/8", other)
Chassis (stand alone)
200g Weight - 53.2 Lbs (24.4 kg)
400g Weight - 81.0 Lbs (37.1 kg)
600g Weight - 111.0 Lbs (50.3 kg)

DAT210 is the standard control circuit board for this unit.