<--Back       Product Pictures      Product Specs (pdf)

                                                                               OEM

450g @ 5% Plasma  Blo₃ck ^® (Liquid-Cooled)

For added application information, see the Plasma Block® Application Guide manual.

Models available :
Refer to - Configuration Options Summary Sheet

Silent, Rugged, Reliable, Safe, Efficient, Cost-effective, Compact, Light-Weight, Ceramic dielectrics.
5.2 lbs/day at 9.5% and 9 LPM; 24 lbs/day at 4.7% weight and 90 LPM (Oxygen or Concentrator).
No exposed high-voltage safety hazards.
Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.
Precise Linear Control with Turn-down to 1%.
Useful pressure range:  5 – 100 psi.
Now available with PlasmaVIEW® software (optional).

Design Features:

• All high voltage is safely contained completely within the Plasma Blo3ck™ thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover.  High-voltage wiring is booted and all metal grounded.
• Pre-mounted, seasoned and tested package sub-system, which includes cells, heat exchangers, inlet gas flow meters, all inlet/outlet piping, manifolds, transformers, individual operational status indicators for each Plasma Block™, PDM controlled inverter, fans.  Design uses the finest quality material and machining for maximum performance and efficiency.  All framework components are epoxy powder-coated.
• Military grade conformal coating eliminates problems associated with condensation and mold as well as greatly retarding damage caused by accidental ozone exposure.
• Directly installable by UL 508a panel house.
• Modular design for service simplicity.
• Instant-ON ozone production -- no warm-up time.   Ideal for ‘over-the-road’ applications.
• No fragile glass or ceramic cylinders which are prone to breakage during  shipping or when used in ‘over-the-road’ applications.
• Micro Channel® design results in high ozone concentration, reduced high-voltage levels and more energy-efficient operation.  Design has been mechanically and electrically optimized for oxygen.  Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive-pressure oxygen.  Materials in the gap are ceramic and aluminum.
• PTI designed custom ceramic high-voltage feed-thru provides the ultimate in high-voltage and high-pressure integrity, connection reliability, and safety.
• Precision-machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures as well as vacuum ride, through should a vacuum pulse occur.  Only 1 psi drop with 60 LPM flow.   As with any cell, the most predictable performance occurs in the positive-pressure domain.  Maximum pressure 100 psi.  2.7 safety factor at 150 psi.
• 23 kHz operating frequency yields compact design, silent operation, lower cost, and no customer irritation due to high- pitched whine customarily present with older medium-frequency designs.
• Advanced design eliminates the possibility of ozone leakage from the body or fittings.  The only ozone leak possible is at the customer-tightened ozone fitting.  All non-metal materials are ozone rated.
• Ozone level automatically controlled to ± 1% from 170v to 260vac.
• The Inverter is a version of PTI’s popular SSD110.  All control and interface features of the SSD110 are available in this product.  To simplify customer use and serviceability,  ALL of PTI’s Air and Liquid-cooled OEM systems use the same Input/Output control wiring connection points and signal levels.  Said another way, unplugging the control connector from a 30g Air system and plugging into this 450g Water system will operate this system, with no wiring or PLC code changes, and no changes to your system user manual.
• Line voltage 208 - 240vac, 3 phase, 50/60hz, approx .6pf.  Optional supply reactor available for improved power factor.  Customer provided soft-start and phase-lose detect if needed.
• Inlet 1/2", Outlet 1/2”;  both Stainless Compression Fittings are standard;  3/8” or 3/8” NPT on request.
• Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs.  Ready to install.   Rigorous 100% performance as well as burn-in tests of all electricals, are conducted to ensure the highest level of product quality,  reliability and consistency.
• Patent Pending design.

Configuration options :
PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (5 - 98 psi) (UL 5x rated)
Oxygen flow liters/minute - ( .6 - 120 Lpm) or equivalent SCFH
Heat load btu/hr = 12300
Inlet fittings (none, 1/4", 3/8", other)
Outlet fittings (none, 1/4", 3/8", other)

Weight Lbs (Kg) : 89.09 (40.66)

Installation Drawings

Top View

Front View

Side View

Bottom View

Output Performance:

Output Performance:  10 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

Normal factory POWER set point:  3600 watts at FULL PDM  ( 10vdc or 20ma ).

Published production-ozone output level (450gr/hr) based on 5% concentration.

Tests conducted at 72°F, 700’ MSL, all pressure readings in psig. Ozone in g/nm3.
Flow measured in LPM via uncorrected Rotameter at inlet port.Ozone at 0 psi from side-stream.