<--Back       Product Pictures      Product Specs (pdf)

                                                              OEM

 60g @ 5%    Plasma  Blo₃ck ^®   (Air-cooled)

For added application information, see the Plasma Block® Application Guide manual.

Models Available:
Refer to - Configuration Options Summary Sheet

Silent, Rugged, Reliable, Cost-effective, Compact and Light Weight, Ceramic,  Air-cooled and power-Efficient.
1.3 lbs/day at 7.7% and 3 LPM : 3.6 lbs/day at 4.2% weight and 15 LPM (Oxygen or Concentrator).
No exposed high-voltage safety hazards.
Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.
Precise Control with Turn-down to  1%.
Useful pressure range:  5 – 100 psi.
Now available with PlasmaVIEW® software (optional).

Design Features:

• All high voltage is safely contained completely within the Plasma Blo₃ck© thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover.  High-voltage wiring is booted and all metal grounded.
• Advanced design eliminates the possibility of ozone leakage from the body or fittings.  The only ozone leak possible is at the customer tightened ozone fitting.  All non-metal materials are ozone rated.
• Military grade conformal coating eliminates problems associated with condensation and mold as well as greatly retarding damage caused by accidental ozone exposure.
• Directly installable by UL 508a panel house.
• Micro Channel® design results in high concentration, reduced high-voltage levels and more efficient operation.  Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive pressure oxygen.  Materials in the gap are:  ceramic and aluminum..
• Ideal for ‘over the road’ .applications.  Instant ON ozone production – no warm up time.
• Precision machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures, as well as vacuum ride through.  Only 1 psi drop with 10 LPM. Flow.   As with any cell, the most predictable performance occurs in the positive pressure domain..  Maximum pressure 86 psi. , certifie by UL at 5X rating.
• Ozone level automatically controlled to ± 1% from 85 to 130vac; or 170v to 260vac depending on model.
• Pre-mounted, seasoned and tested package sub-system, which includes cell, transformer, inverter and fan.  Design uses the finest quality material and machining for maximum performance and efficiency.
• The Inverter is a reduced power version of PTI’s popular SSD110.  All control and interface features of the SSD110 are available in this product.
• 23 kHz operating frequency for silent operation.
• Line voltage 120v or 240v, 50/60hz.
• Inlet 3/8", Outlet 3/8”  both Stainless Compression are standard;  1/4” or 1/4” NPT on request.
• Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs.  Ready to install.  Rigorous 100% performance as well as burn-in tests of all electricals, are conducted to ensure the highest level of product quality, reliability and consistency.

Configuration options :
PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (5 - 86 psi) (UL 5x rated)
Oxygen flow liters/minute - ( .1 - 20 Lpm) or equivalent SCFH
Heat load btu/hr = 1700
Inlet fittings (none, 1/4", 3/8", 8mm, 10mm, other)
Outlet fittings (none, 1/4", 3/8", 8mm, 10mm, other)

Weight Lbs (Kg) : 22.45 (10.19)

Installation Drawing:   Inches

Output Performance:

Output Performance:  5 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

Normal factory POWER set point:  500 watts at FULL PDM  ( 10vdc or 20ma ).

Published production-ozone output level (60gr/hr) based on 5% concentration.

Tests conducted at 72°F, 700’ MSL, all pressure readings in psig. Ozone in g/nm3.
Flow measured in LPM via uncorrected Rotameter at inlet port.Ozone at 0 psi from side-stream.

Output Performance:  10 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

Normal factory POWER set point:  500 watts at FULL PDM  ( 10vdc or 20ma ).

Published production-ozone output level (60gr/hr) based on 5% concentration.

Tests conducted at 72°F, 700’ MSL, all pressure readings in psig. Ozone in g/nm3.
Flow measured in LPM via uncorrected Rotameter at inlet port.Ozone at 0 psi from side-stream.

Output Performance:  15 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

Normal factory POWER set point:  500 watts at FULL PDM  ( 10vdc or 20ma ).

Published production-ozone output level (60gr/hr) based on 5% concentration.

Tests conducted at 72°F, 700’ MSL, all pressure readings in psig. Ozone in g/nm3.
Flow measured in LPM via uncorrected Rotameter at inlet port.Ozone at 0 psi from side-stream.

Output Performance:  20 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

Normal factory POWER set point:  500 watts at FULL PDM  ( 10vdc or 20ma ).

Published production-ozone output level (60gr/hr) based on 5% concentration.

Tests conducted at 72°F, 700’ MSL, all pressure readings in psig. Ozone in g/nm3.
Flow measured in LPM via uncorrected Rotameter at inlet port.Ozone at 0 psi from side-stream.

Flow  vs  % Weight   (500 Watts)

PDM Control Voltage  vs  Input Power ( Watts)