450g @ 5% PlasmaBlock® water cooled

450g @ 5% PlasmaBlock® water cooled

Product Summary

The largest size Plasma Block containing multiple ozone subassembly blocks.  Available in Gen1 or Gen2. 5.2 lbs/day at 9.5% and 9 LPM; 24 lbs/day at 4.7% weight and 90 LPM (Oxygen or Concentrator). Pre-mounted, seasoned and tested package sub-system which includes individual operational status indicators for each Plasma Block® , PDM controlled inverter, fans.

Product Details

For added application information, see the PlasmaBlock® Application Guide manual.

Models available 

Refer to - Configuration Options Summary Sheet

  • Silent, Rugged, Reliable, Safe, Efficient, Cost-effective, Compact, Light-Weight, Ceramic dielectrics.
  • 5.2 lbs/day at 9.5% and 9 LPM; 24 lbs/day at 4.7% weight and 90 LPM (Oxygen or Concentrator).
  • No exposed high-voltage safety hazards.
  • Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.
  • Precise Linear Control with Turn-down to 1%.
  • Useful pressure range:  5 – 100 psi.
  • Now available with PlasmaVIEW® software (optional).

Design Features

  • All high voltage is safely contained completely within the Plasma Blo3ck™ thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover.  High-voltage wiring is booted and all metal grounded.
  • Pre-mounted, seasoned and tested package sub-system, which includes cells, heat exchangers, inlet gas flow meters, all inlet/outlet piping, manifolds, transformers, individual operational status indicators for each Plasma Block™, PDM controlled inverter, fans.  Design uses the finest quality material and machining for maximum performance and efficiency.  All framework components are epoxy powder-coated.
  • Military grade conformal coating eliminates problems associated with condensation and mold as well as greatly retarding damage caused by accidental ozone exposure.
  • Directly installable by UL 508a panel house.
  • Modular design for service simplicity.
  • Instant-ON ozone production -- no warm-up time.   Ideal for ‘over-the-road’ applications.
  • No fragile glass or ceramic cylinders which are prone to breakage during  shipping or when used in ‘over-the-road’ applications.
  • Micro Channel® design results in high ozone concentration, reduced high-voltage levels and more energy-efficient operation.  Design has been mechanically and electrically optimized for oxygen.  Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive-pressure oxygen.  Materials in the gap are ceramic and aluminum.
  • PTI designed custom ceramic high-voltage feed-thru provides the ultimate in high-voltage and high-pressure integrity, connection reliability, and safety.
  • Precision-machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures as well as vacuum ride, through should a vacuum pulse occur.  Only 1 psi drop with 60 LPM flow.   As with any cell, the most predictable performance occurs in the positive-pressure domain.  Maximum pressure 100 psi.  2.7 safety factor at 150 psi.
  • 23 kHz operating frequency yields compact design, silent operation, lower cost, and no customer irritation due to high- pitched whine customarily present with older medium-frequency designs.
  • Advanced design eliminates the possibility of ozone leakage from the body or fittings.  The only ozone leak possible is at the customer-tightened ozone fitting.  All non-metal materials are ozone rated.
  • Ozone level automatically controlled to ± 1% from 170v to 260vac.
  • The Inverter is a version of PTI’s popular SSD110.  All control and interface features of the SSD110 are available in this product.  To simplify customer use and serviceability,  ALL of PTI’s Air and Liquid-cooled OEM systems use the same Input/Output control wiring connection points and signal levels.  Said another way, unplugging the control connector from a 30g Air system and plugging into this 450g Water system will operate this system, with no wiring or PLC code changes, and no changes to your system user manual.
  • Line voltage 208 - 240vac, 3 phase, 50/60hz, approx .6pf.  Optional supply reactor available for improved power factor.  Customer provided soft-start and phase-lose detect if needed.
  • Inlet 1/2", Outlet 1/2”;  both Stainless Compression Fittings are standard;  3/8” or 3/8” NPT on request.
  • Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs.  Ready to install.   Rigorous 100% performance as well as burn-in tests of all electricals, are conducted to ensure the highest level of product quality,  reliability and consistency.
  • Patented design.

Configuration options 

PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (5 - 98 psi) (UL 5x rated)
Oxygen flow liters/minute - ( .6 - 120 Lpm) or equivalent SCFH
Heat load btu/hr = 12300
Inlet fittings (none, 1/4", 3/8", other)
Outlet fittings (none, 1/4", 3/8", other)
Weight Lbs (Kg) : 89.09 (40.66)

Related Manuals

(pdf format, view or download)

Installation Operation
How to read the performance graphs
PlasmaBlock Performance Specs (heat dissipation, current, ozone output)

DAT210 is the standard control circuit board for this unit.

DAT210 Quick Start Manual
DAT210 Installation and Operation Manual

Product Photos

Output Performance Charts

Training and Instructional Videos

DAT210 Tuning

DAT210 On Delay Timer

IGBT and Diode Bridge Testing

16 Pin Kit Testing

Fust and Power Supply Testing

DAT210 Set Power Point

DAT210 Firmware 3 1

DAT210 Start Button Sweep

DAT210 New Profile Procedure

DAT210 Normal Running

DAT210 LED Fault Indicators

DAT210 Connection Safety Considerations

Installation Drawings