PTIreworkTopStretch                                                              OEM

  120g @ 5%    Plasma  Blo3ck ™   (Air-cooled)

·        Silent, Rugged, Reliable, Cost-effective, Compact and Light Weight, Ceramic,  Air-cooled and power-Efficient.

·        1.5 lbs/day at 9.2% and 3 LPM : 8 lbs/day at 4.7% weight and 30 LPM (Oxygen or Concentrator).

·        No exposed high-voltage safety hazards.

·        Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.

·        Precise Linear Control with Turn-down to 1%.

·        Useful pressure range:  5 – 100 psi.

 
 
Patent Pending

 

Design Features:

·        All high voltage is safely contained completely within the Plasma Blo3ck©, thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover.  High-voltage wiring is booted and all metal grounded.

·        Advanced design eliminates the possibility of ozone leakage from the body or fittings.  The only ozone leak possible is at the customer-tightened ozone fitting.  All non-metal materials are ozone rated.

·        Micro Channel© design results in high concentration, reduced high-voltage levels, and more efficient operation.  Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive-pressure oxygen.  Materials in the gap are ceramic and aluminum.

·        Ideal for ‘over-the-road’ applications.  Instant-ON ozone production -- no warm up time.

·        Precision-machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures, as well as vacuum ride through.  Only 1 psi drop with 20 LPM flow.   As with any cell, the most predictable performance occurs in the positive-pressure domain.  Maximum pressure 100 psi.  2.7 safety factor at 150 psi.

·        Ozone level automatically controlled to ± 1% from 85 to 130vac; or 170v to 260vac, depending on model.

·        Pre-mounted, seasoned and tested package sub-system, which includes cell, transformer, inverter and fan.  Design uses the finest quality material and machining for maximum performance and efficiency.

·        The Inverter is a reduced-power version of PTI’s popular SSD110.  All control and interface features of the SSD110 are available in this product.

·        23 kHz operating frequency for silent operation.

·        Line voltage 120v or 240v (Standard), 50/60hz.

·        Inlet 3/8", Outlet 3/8”;  both Stainless Compression Fittings are standard;  1/4” or 1/4” NPT on request

·        .Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs.  Ready to install.   Rigorous 100% performance and burn-in tests of all electricals are conducted to ensure the highest level of product quality,  reliability  and consistency.

Installation Drawing:   Inches

 

 

Output Performance:  5 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  10 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  15 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  20 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  50 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  75 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

Output Performance:  100 psi

% Weight  vs  Power Consumption

Grams / Hour  vs  Power Consumption

 

Normal factory POWER set point:  1000 watts at FULL PDM  ( 10vdc or 20ma ).

 

Published production-ozone output level (120gr/hr) based on 5% concentration.

 

Tests conducted at 72°F, 700’ MSL, Gas: ‘Standard’ In; ‘Normal’ Out.

 

Best performance between 10 and 15 psi.

 

Flow  vs  % Weight   (1000 Watts)

 

 

 

 

PDM Control Voltage  vs  Input Power ( Watts)